A pendulum clock you can open up: tune it, change its wheels and hear it keep time.
Rate
This clock is measuring
measuring
your clock --:--:-- real --:--:--
Escapement
- Amplitude
- -
- Beat
- -
- Beat error
- -
lock impulse drop
Train check
- seconds hand: once every 60 s
- minute hand: once every 60 min
- hour hand: once every 12 h
How it's built
The pendulum and the escape wheel are two bodies in a rigid-body simulation that runs 2,000 steps a second in a Web Worker. Each escape-wheel tooth is a point that meets a ruby pallet polygon: it lands, locks, slides down the impulse face and drops. The pendulum feels gravity, a little damping and those contacts, so the amplitude, the beat and the rate in seconds a day are measured from what it does, not drawn.
The gear train is a kinematic reduction: exact integer ratios, an efficiency per mesh and a reflected inertia at the escape wheel. Only the escapement has contact dynamics. Teeth are involute profiles generated from the module and tooth count. The movement is drawn from the same polygons the physics uses. This is a model, not a certificate: the rate is what the simulated clock does, and a real clock will differ.